Cleaning And Maintenance - Eldom humie CS10 Manual De Instrucciones

CLEANING AND MAINTENANCE

- allow the unit to cool down completely before cleaning,
- do not immerse the kettle in water while washing up,
- the outside of the kettle may be wiped over with a damp cloth and washing-up liquid,
- water stains inside the kettle can be removed by rubbing with a cloth moisten with white
vinegar; rinse the inside with water afterwards,
- limescale should be removed in the following way:
- fill the kettle with 0.75 litre of water and bring it to boil,
- switch the kettle off and disconnect the kettle from the power supply,
- pour 0.1 litre of white vinegar into the kettle,
- allow to stand overnight,
- discard the solution and rinse the inside with water,
- fill the kettle with 1 litre of water and bring to boil,
- discard the water and rinse the inside with water.
- no timely removal of the scale from the heating element results in the heating element's
quicker wear,
- any damage resulting from applying harsh descalling products available in the market
are not covered by the producer's warranty,
- if the power cord is damaged, it can be replaced only by an especially constructed one
(with appropriate plugs and endings).
FILTER
The filter provided is made of mesh retaining scale deposits. The filter does not remove
the scale, but it prevents any deposits from getting inside the kettle while the water is
being poured in.
The filter should be cleaned regularly.
Hard water may block the filter after boiling water a couple of times.
10|EN