Dismantling And Cleaning The Impeller - Maytronics Dolphin Explorer Classic 9 Instrucciones De Uso

4. Reassembling the filter elements
Insert the locating tabs at the bottom of the filter element into their grooves on the base frame
then close the "S" clip.
Reinstall the base frames with filters according
to the diagram.
Do not force the filters into place.
CAUTION
8
8151620_Expolorer_all languages.indd 8
Locating tab
Locating tab groove
Grooved
end
fitting

6.2. Dismantling and cleaning the impeller

Unplug the power supply before
cleaning.
CAUTION
Dismantle the impeller cover and clean around the
impeller housing, then reassemble.
(Use Phillips head screwdriver).
Dolphin Explorer Classic 9 / Top 9
"S" clip
Octagonal
end
fitting
User Instructions
|
6/03/13 5:26 PM