Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
[] Main Menu
Thissection describes t he overview of the main menudisplayed whenyon
press[SETUP]. F ormoredetails,see the referencepagefor eachitem.
Themain menu consists o f the function setting itemsbelow.
Press [SETUP].
[] Autoscan
If yonswitch wires(e.g.,between antenna and CATV) o r if you move the
unitto a differentareaafter the initial setting, or if yourestorethe DTV
channelyon deleted,youwill needto perform autoscan.
Beforeyou begin: Make sureif the unit isconnected to antenna or cables.
_
Press [SETUP] to display the main menu.
_
Use[Cursor AIr]
to select"CHANNEL", then press
[ENTER].
EN
PICTURE
You can adjust the picture
quality.
(Refer to "Picture
Adjustment"
on page 21.)
SOUND
You can adjust the sound quality.
(Refer to "Sound Adjustment"
on page 22.)
CHANNEL
. You can automatically
scan the viewable
channels.
(Refer to "Autoscan"
on page 18.)
. You can skip the undesired
channels
when selecting
the channels using [CH A/V].
(Refer to "Channel
List" on page 19.)
. You can add the channels that were not scanned by
the autoscan.
(Refer to "Manual
Register"
on page 19.)
DETAIL
. You can change the display format for closed
caption,
which displays the dialogue
of a -IV program
or other information
across the TV screen.
(Refer to "Closed Caption"
on page 23.)
, You can setthe
viewing
limitations.
(Refer to "Child Lock" on page 26.)
, You can adjust the position,
stability
and clarity of the
PC screen.
(Refer to "PC Settings"
on page 30.)
, You can select the energy saving mode.
(Refer to "Energy Saving Mode" on page 31.)
, When you adjust the desired "PICTURE" and
"SOUND" mode, you must switch
the setting
from
"Retail" to "Home".
(Refer to "Location"
on page 31 .)
. You can confirm
the version
of the software
currently
used in this unit.
(Refer to "Current Software
Info" on page 32.)
LANGUAGE
You can change the language
(English, Spanish,
French) displayed
on the main menu.
(Refer to "Language
Selection"
on page 20.)
or
V
_
Use [Cursor
AIr]
to select"Autoscan",
then press
[ENTER].
or
Use [Cursor AIr]
to select an appropriate
option, then
press [ENTER].
or
. When aerial antenna
is connected,
select"Antenna".
. When connected
to CATV, select"Cable".
. "Autoscan"will
begin.
.
When
the scanning
and
memorizing
are completed,
the lowest
memorized
channel
will
be displayed.
Note:
• After setting "Autoscan" using [CH A / Y] on the remote
con trol skips unavailable
programs
automatically.
• If you connect the cable system directly,
contact
the CATV
installer.
• If you press [POWER]
or [SETUP] during
autoscan,
the
setting
wifl be canceled.
• Even if"Autoscan"is
completed,
the channel setting
wifl be
lost if the AC power cord is unplugged
before turning
off
the unit by pressing [POWER].
• The PIN Code will be required once you set a PIN Code in
the "Child Lock" (Refer to page26).
o If you want to change your PIN Code, follow
the instruction
of "New PIN Code" (Refer to page 29.)
Publicidad
Tabla de contenido
