Bartscher A150114G Manual Del Usuario página 37

Switching the device on
CUATION!
Before connecting the temperature controller, set the dial to „OFF" position.
First, connect the temperature controller to the device and then to the mains
socket.

Connect the device to a single, properly installed and grounded socket.

Set the temperature dial in the position corresponding to the temperature desired for
a given dish.
Scale (°C)
MIN - 1 to 100
2 above 100
3-4 150 - 200
5

After setting the temperature controller knob in selected position the controller
indicator light comes on, which indicates heating of the device.
NOTE!
During operation of the device the indicator light comes on and goes off,
which indicates maintaining of preset temperature.

Preparation of food should start after reaching the preset temperature (the control
light goes off).

Prepare food.

Preparation time depend on type and amount/size of food, individual preferences, and
preferred preparation method; it should be determined upon the basis of user's
experience.
HOT SURFACE! Burn hazard!
The device becomes very hot during its operation, do not
touch it with bare hands. Use pan and lid handles.
Food type
keeping warm
roasing, preparation of
hamburgers, etc.
pancakes, scrambled eggs,
frying of ham, bacon, etc.
240 grilling, preparation of pizza
- 33 -