Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
User Guide Magnum 742-762
1 .
Generalities
Caution:
Before handling the system, each user must read and understand the instructions in this document. The safety
instructions must be observed. Retain this document for future reference.
1.1.
Scope of the documentation
The documentation provides the information necessary for appropriate use of the system. It informs the user to ensure efficient
execution of operation or maintenance procedures. This document is not aimed at the installer.
Visit our website https://www.pentairaquaeurope.com/product-finder/product-type/control-valves to download the installer
manual.
1.2.
Release management
Release
A
02.08.2017
B
26.06.2018
C
25.10.2019
1.3.
Manufacturer identifier, product
Manufacturer:
Pentair International LLC
Avenue de Sevelin 18
1004 Lausanne
Switzerland
1.4.
Applicable norms
This product complies with the following guidelines:
• 2006/42/EC: Machinery Directive;
• 2014/35/UE: Low Voltage Directive;
• 2014/30/UE: Electromagnetic compatibility;
• 2011/65/EC: Restriction of use of certain hazardous substances in electrical and electronic equipment (RoHS). Meets the
following technical standards.
• UNI EN ISO9001.
And meets the following technical standards :
• IEC/EN 60335-1;
• IEC 61010-1;
• EN 55014-1;
• EN 55014-2;
• EN 61000-3-2: 2006 + A1: 2009 + A2: 2009;
• EN 61000-3-3: 2008;
• EN 61000-6-2: 2005;
• EN 61000-6-3: 2007 + A1: 2011;
• EN 61326-1.
1.5.
Limitation of liability
Pentair Quality System EMEA products benefit, under specific conditions, from a manufacturer warranty that may be invoked
by Pentair's direct customers. Users should contact the vendor of this product for applicable conditions and in case of a
potential warranty claim. Pentair accepts no liability for equipment installed by the user upstream or downstream of Pentair
products, as well as for process/production processes which are installed and connected around or even related to the
installation. Disturbances, failures, direct or indirect damages that are caused by such equipment or processes are also
excluded from the warranty. Pentair shall not accept any liability for any loss or damage of profits, revenues, use, production,
or contracts, or for any indirect, special or consequential loss or damage whatsoever. Please refer to the Pentair List Price to
know more about terms and conditions applicable to this product.
4 / 36
Date
Authors
STF/ESA
BRY/FIM
STF
Description
First edition.
Address change.
Corrections.
Product:
Magnum 742-762
Ref. MKT-UG-012 / C - 25.10.2019
Publicidad
Tabla de contenido
