Description And Components Location; Basic Programming - Pentair Magnum 742-762 Manual Del Usuario

User Guide Magnum 742-762
3.3.

Description and components location

Brine
3.4. Bypassing
If the system is equipped with a bypass and if a problem occurs, turn the valves to bypass the system as shown in the picture
below.
In
Normal
operation
4 . Programming
Note:

After 30 seconds without a button press, the unit returns to normal operation.
4.1.

Basic programming

Note:

Menus are displayed in a defined and incremental order.
Time setting and winter time - summer time change
A
Press when the time of the day is displayed.
→
Time flashes.
B
Adjust displayed time with
C
Press to validate the selection and advance to the next parameter.
Day of week
D
Press .
→
Arrow flashes.
E
Select displayed day with
F
Press to validate the selection and advance to the next parameter.
6 / 36
Inlet
Outlet
Tank connection
Controller
Refill control assembly
Injector assembly
Pilot filter screen
Drain
Out
and .
and .
LCD display
DOWN button
SET button
Manual REGEN button
In
Ref. MKT-UG-012 / C - 25.10.2019
UP button
Out
In Bypass