Berner BACD-1 12 V Manual Original página 16

OBJ_BUCH-3425-001.book Page 16 Friday, November 3, 2017 3:36 PM
when unintentionally actuating the On/Off
switch.
 For safe and proper working, always keep the
machine and ventilation slots clean.
When the battery is no longer operative, please re-
fer to an authorised after-sales service agent for
Berner power tools.
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair
should be carried out by an after-sales service cen-
tre for Berner power tools.
In all correspondence and spare parts orders,
please always include the 6-digit order number giv-
en on the nameplate of the machine.
Transport
The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
The user can transport the batteries by road with-
out further requirements.
When being transported by third parties (e.g.: air
transport or forwarding agency), special require-
ments on packaging and labelling must be ob-
served. For preparation of the item being shipped,
consulting an expert for hazardous material is re-
quired.
Dispatch batteries only when the housing is un-
damaged. Tape or mask off open contacts and
pack up the battery in such a manner that it cannot
move around in the packaging.
Please also observe possibly more detailed nation-
al regulations.
Disposal
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose of power tools into house-
hold waste!
Only for EC countries:
According to the European Guideline 2012/19/EU,
power tools that are no longer usable, and accord-
ing to the European Guideline 2006/66/EC, defec-
tive or used battery packs/batteries, must be col-
lected separately and disposed of in an
environmentally correct manner.
Battery packs/batteries:
Li-ion:
Please observe the instructions in section "Trans-
port", page 16.
Subject to change without notice.
16 | English
1 609 92A 44C • 3.11.17