Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IV. SAFETY INSTRUCTIONS
WARNING!
WARNINGS AND INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE
USING THIS PRODUCT. FAILURE TO DO SO MAY CAUSE DAMAGE OR
PERSONAL INJURY.
Do not place the helmet on a hot surface
•
Do not immerse the filter in water or any other liquid
•
Protect the filter from being in contact with liquid or dirt. Clean
•
filter surface regularly.
The front cover lens is not unbreakable and does not provide
•
extraordinary protection against flying particles, splash, spray,
and spatter. The helmet will only protect the eyes and face from
radiation and sparks.
Never open or tamper with the Auto-Darkening filter
•
The outside of the lens must be equipped with an outside
•
protection plate (included) to prevent potential non-repairable
hazards.
Keep away from children, children must never be allowed in the
•
work area. DO NOT! let them handle machines, tools, or
extension cords.
DO NOT! Use if the filter does not darken immediately upon
•
striking the arc.
DO NOT! Use the helmet as a hand shield. Wear the helmet
•
correctly.
Wear approved safety glasses with side shields under your
•
helmet.
Use protective screens or barriers to protect others from flash
•
and glare; warn others not to watch the arc.
WARNING!
BEFORE USING YOUR NEW AUTO- DARKENING WELDING HELMET
The Auto-darkening welding helmet is designed to protect the eyes and face from
specks, spatter, and harmful radiation under normal welding conditions. The Auto-
darkening filter automatically changes from a light state to a dark state in only
1/25000S when an arc is struck and it returns to the light state when welding stops.
This product is suitable for a variety of welding processes.
•
When the arc is struck, the Auto-darkening filter will turn from a clear
state to a dark state. The response time is less than 1/25000S.
•
The helmet provides the user's eyes and face full protection against UV and
IR radiation during the entire welding process, even in the clear state. The
UV/IR protection level is up to the shade 13 (DIN) at all times.
•
The product is in full conformity with related DIN, EN safety standards, and
ANSI Z87.1 standards.
FOR YOUR SAFETY & PROTECTION, READ ALL SAFETY
CAREFULLY READ AND UNDERSTAND ALL INSTRUCTIONS
3
Publicidad
Tabla de contenido
