Duronic FN45 Manual De Instrucciones página 8

How to Use the FN65
1. Adjustment of the Wind Direction
The angle of the fan head is adjustable upwards or downwards by slightly
lifting or pressing the mesh cover.
2. Adjustment of the Rotation/Oscillation
Pressing the oscillation lock on top of the motor head will activate the rotation
function. Pull the button up again to stop the fan head oscillating.
3. Adjusting the Wind Speed
This fan has 3 speed settings which can be selected by pressing the
numbered buttons on the control pad: button 1 = low wind, 2 = medium wind, 3
= high wind. Press button 0 to stop the fan.
4. Setting the Timer
This fan has a built-in timer which will automatically turn off the fan after a
selected time. Simply turn the timer dial to the desired time, choose from 10,
20, 30, 40, 50 and 60 minutes.
Troubleshooting
1. Make sure the blade is tightly inserted into the shaft pin of the motor.
2. Make sure the back of the cover is properly inserted onto the groove on the
fan head.
3. Make sure the edges of the blade are not damaged.
4. Make sure the mesh covers have not been damaged and do not come into
contact with the fan blade.
8