Control panel
WASH CYCLE
SELECTOR
knob
ON/OFF
Button with
TEMPERATURE
indicator light
Button with
ON/OFF indicator light: press this briefly
to switch the machine on or off. The green indicator light
indicates that the machine is switched on. To switch off the
washing machine during the wash cycle, press and hold
the button for approximately 3 seconds; if the button is
pressed briefly or accidentally the machine will not switch
off. If the machine is switched off during a wash cycle, this
wash cycle will be cancelled.
WASH CYCLE SELECTOR knob: may be turned in
either direction. To select the most suitable wash cycle,
please refer to the "Table of wash cycles".
The knob will not move during the wash cycle.
TEMPERATURE
button: press to modify or exclude
the temperature setting; the value selected will appear on
the display above (see "Running a wash cycle").
SPIN CYCLE
button: press to modify or exclude the
spin cycle; the value selected will appear on the display
above (see "Running a wash cycle").
DELAYED START
button: press to set a delayed start
for the selected wash cycle; the set delay time will appear
on the display above (see "Running a wash cycle").
OPTION buttons with indicator lights: press to select the
available options. The indicator light corresponding to the
selected option will remain lit (see "Running a wash cycle").
WASH CYCLE PHASE icons: these illuminate to indicate the
progress of the wash cycle (Wash
Drain
). The text
lights up when the cycle is complete.
All manuals and user guides at all-guides.com
OPTION
buttons
with indicator lights
DISPLAY
button
SPIN
button
– Rinse
– Spin
OPTION
buttons
with indicator lights
DELAYED
START
button
START/PAUSE button with indicator light: when the green
indicator light flashes slowly, press the button to start a
wash cycle. Once the cycle has begun the indicator light
will remain lit in a fixed manner. To pause the wash cycle,
press the button again; the indicator light will flash in an
orange colour. If the "LOCK"
off, the door may be opened. To start the wash cycle from
the point at which it was interrupted, press the button
again.
LOCK
indicator light: indicates that the porthole door
is locked. To open the door, pause the wash cycle (see
"Running a wash cycle").
CONTROL PANEL LOCK
to activate or deactivate the control panel lock, press and
hold the button for approximately 2 seconds. when the
indicator light is illuminated, the control panel is locked.
This means it is possible to prevent wash cycles from being
modified accidentally, especially where there are children in
the home.
ECO indicator light: the
altering the washing parameters, an energy saving of
at least 10% is made. Furthermore, before the machine
enters "Standby" mode, the icon will light up for a few
seconds; when the machine is switched off the estimated
energy saving will be around the 80% mark.
–
ECO
indicator light
START/
PAUSE
button with
indicator light
CONTROL PANEL
LOCK
button with
LOCK
indicator light
indicator light
indicator light is switched
button with indicator light:
icon lights up when, after
EN
WASH
CYCLE
PHASE
icons
7