To enjoy boiled meat and vegetables safely, always boil these foods twice: The
second heating after at least 24 hours. You can find more information about
this at: https://www.bzfe.de/inhalt/einkochen-1348.html (Federal Centre for
Nutrition)
Switching the device on and off
1.
Set the thermostat to the desired temperature Set the on / off switch to „I".
2.
Turn the switch counterclockwise to continuous operation (Cont.). The device
will heat up. The indicator light will come on, signaling that the heater is
active.
3.
Once the set temperature is reached, the device will sound a beep and the
indicator light will turn off. The beep indicates that the cooking time (see
Preserves Table) must now be set. Turn to the timer clockwise to the desired
time.
4.
The temperature is then held at the set value. The temperature light will
go out, but every now and then will light up again when the temperature
falls below the set value and the device must heat up again. A constant
temperature is important for the quality of the preserve.
5.
When the cooking time has elapsed the device switches off automatically.
EN
17