Publicidad
Idiomas disponibles
Idiomas disponibles
ISO DDIN radio provision
1. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
2. Insert the radio trim panel into the
factory radio trim removed in step
4 of dash disassembly. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the dash,
complete all necessary connections
to the radio and test the radio
for proper operation. Metra
recommends using the proper
mating adapter from
Metra and/or AXXESS.
4. Mount the radio into the dash using
the factory hardware.
5. Reassemble the dash in the reverse
order of disassembly.
Kit Assembly
(Figure A)
95-6535B
(Figure B)
3
Publicidad
