Koala Kare KB311-SSWM Guia De Inicio Rapido página 4

KB311-SSWM Baby Changing Station
Information
Material
Grey injection-molded polypropylene with Microban® antimicrobial additive embedded into the bed surface. Reinforced steel-on-steel
hinge mechanism and plated or powder coated steel mounting chassis with mounting hardware included. Satin finished 304 stainless
steel deep drawn outer shell and recessed pan. Machined aluminum handle with satin stainless steel finish. Solid stainless steel external
bag hook. Labeled usage instructions and safety messages. Contoured changing surface area 535 sq. In (3452 sq. cm) and comes
complete with safety strap. Dual cavity liner dispenser holds approximately 50 KB150-99 bed liners.
Operation
Concealed pneumatic cylinder and metal mounting chassis provides controlled, slow opening and closing of bed. Polypropylene is easy
to clean and resists odors and bacterial growth. Complies with ASTM static load performance requirements when properly installed.
Internal liner dispenser with integrated spring tab dispensed one liner at a time. Handle on front of unit requires less than 5 lbs. of force
to open and close bed.
Warning: To ensure that the unit supports the intended loads, baby changing stations must be properly installed according to the
manufacturer's instructions.
Specification
Baby changing station shall have durable, single piece deep drawn 304 satin finished stainless steel outer shell and recessed pan, with
injection-molded polypropylene interior. Design of unit shall be surface-mounted. Unit shall be equipped with a pneumatic cylinder
for controlled opening and closing of bed. Bed shall be secured to metal mounting chassis with a concealed steel-on-steel hinge. No
hinge structure shall be exposed on interior or exterior surfaces. Unit shall have mounting hardware included. Unit shall have Microban®
antimicrobial embedded into plastic material on the changing surface. Unit shall fully comply with ADA regulations when properly
installed. Bed shall have smooth concave changing area with a safety strap and external stainless steel hook for bags or purse provided.
The design and manufacture of Koala products is intended to be compliant with the 2010 ADA Standards for Accessible Design and the
2009 ICC A117.1, Accessible and Usable Buildings and Facilities. Unit shall conform to ASTM F2285-04(16) Standard Safety Performance
Specification for Diaper Changing Tables for Commercial Use, ANSI Z535.4 Product Safety Signs and Labels, EN 12221:2008+A1: 2013.
Unit shall have a built-in Liner Dispenser for use with 3-ply chemical free biodegradable bed liners, instructional graphics and safety
messages in 4 languages. Unit shall be backed by manufacturer's 5-year limited warranty on materials and workmanship and include a
provision for replacement caused by vandalism.
Unit shall be manufactured in the U.S.A.
ADA Requirements
Additional information on how this product complies with ADA requirements can be found in the KB310 & KB311 Baby Changing
Stations Accessibility Compliance document on www.koalabear.com.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. The manufacturer
reserves the right to, and does from time to time, make changes and improvements in designs and dimensions without notice.
Koala Kare Products
A Division of Bobrick
©2021 Koala Kare Products, KB311-SSWM TDS March 2021
6982 South Quentin Street, Centennial, CO 80112-3945
Main: 303.539.8300 | Toll Free: 888.733.3456 | Fax: 303.539.8399
Website: koalabear.com | Email: customerservice@koalabear.com