Philips BC8210 Manual Del Usuario página 7

XP SBC BC 8210/00-1.1
Installation
Speaker battery replacement
(figure 2)
IMPORTANT
Use only rechargeable LR6/AA NiCd
batteries (preferably Philips).
Do not use alkaline batteries as
these may damage your FM wireless
system!
1 Remove the battery cover.
2 Take out the batteries and dispose of them
properly.
3 Insert new batteries. Only use LR6/AA
NiCd batteries (preferably Philips).
4 Make sure the batteries are correctly
inserted as indicated by the engraved
symbols in the battery compartment.
5 Replace the battery cover.
IMPORTANT
Before using the FM speaker for the
first time, please ensure that the
batteries are fully charged for about
16 hours.This will guarantee a longer
operating lifetime of the batteries.
20-08-2001 13:43
1 Connect the 3.5 mm stereo plug of the
2 Switch on your audio source and carefully
3 Switch on the speaker.You may hear a
4 To tune, turn the tuning wheel until the
5 Adjust the volume to the desired level with
Pagina 7
Audio Connections
Audio Connections
Option 1 (figure 3)
Connecting the FM transmitter
SBC HC 8372 to a headphone
output of an audio source
stereo audio cable to the headphone
output of an audio source, such as TV, HiFi
or PC.
– In case your audio source has a 6.3 mm
headphone output, use the 3.5 mm to
6.3 mm stereo adapter plug.
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
hissing sound through the speaker if the
speaker is not yet properly tuned to the
transmitter.
signal is at its clearest.
the speaker volume control.
7