Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TECHNICAL DATA
Parameter description
Parameter value
REFRIGERATED DISPLAY
Product name
CABINET 78L
Model
RCCC-78-WT
RCCC-78-BT
Rated voltage [V~] /
230/50
Frequency [Hz]
Rated power [W]
240,0
Protection class
I
Climatic class
4
Capacity [L]
78,0
Refrigerant
R600a(45g)
Insulation
EPS
Temperature range
0-12
[°C]
Rated current
1.73A
Rated useful luminous
340Im
flux [ϕuse]
Rated power in "ON"
2,3W
mode [Pon]
Rated correlated
6500K
temperature [CCT]
Rated service life [h]
20000
Dimensions [mm]
447x400x969
Weight [kg]
35
Control hardware
Declared output
power of the control
2,6W
hardware [Pcg]
Rated voltage [V~] /
230/50/60
Frequency [Hz]
REFRIGERATED DISPLAY
Product name
CABINET 58L
Model
RCCC-58-WT
RCCC-58-BT
Rated voltage [V~] /
230/50
Frequency [Hz]
Rated power [W]
240,0
Protection class
I
Climatic class
4
Capacity [L]
100
Refrigerant
R600a(45g)
Insulation
EPS
Temperature range
0-12
[°C]
Rated current
1.73A
8
U S E R M A N U A L
Rated useful luminous
340Im
flux [ϕuse]
Rated power in "ON"
2,3W
mode [Pon]
Rated correlated
6500K
temperature [CCT]
Rated service life [h]
20000
Dimensions [mm]
447x400x819
Weight [kg]
31
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation. (general
warning sign).
ATTENTION! Electric shock warning!
Only use indoors.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to REFRIGERATED DISPLAY
CABINET.
Rev. 29.06.2021
2.1.ELECTRICAL SAFETY
a)
The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Do not touch the device with wet or damp hands.
c)
Use the cable only for its designated use. Never use
it to carry the device or to pull the plug out of a
socket. Keep the cable away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
d)
If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
e)
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
f)
To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
g)
ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
h)
Do not use in very humid environments or in the
direct vicinity of water tanks.
i)
Prevent the device from getting wet. Risk of electric
shock!
2.2. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A
messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use
common sense when working with the device.
b)
If you discover damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
c)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
f)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
g)
Use the device in a well-ventilated space.
h)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
i)
Keep packaging elements and small assembly parts
in a place not available to children.
j)
Keep the device away from children and animals.
REMEMBER! When using the device, protect
children and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
Rev. 29.06.2021
EN
b)
The machine may be operated by physically fit
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c)
The machine is not designed to be handled by
persons (including children) with limited mental
and sensory functions or persons lacking relevant
experience and/ or knowledge unless they are
supervised by a person responsible for their safety or
they have received instruction on how to operate the
machine.
d)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
h)
Do not move, adjust or rotate the device in the
course of work.
i)
Clean the device regularly to prevent stubborn grime
from accumulating.
j)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
k)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
r)
Keep the device away from sources of fire and heat.
s)
Do not overload the device.
t)
Do not cover the ventilation openings!
u)
Place the device on a flat, stable surface and make
sure it is not placed horizontally, upside down, or at
an angle greater than 45°.
v)
Do not use or store the device near flammable
products that produce fumes. This increases the risk
of fire or explosion.
w)
The device is a free-standing device and is not
suitable for fixed furniture joinery.
9
Publicidad
