Pioneer PD-50AE Manual De Instrucciones página 9

> Before Start > Part Names
Connecting with a digital optical cable
The signal is converted to analog in the D/A converter of the
integrated amplifier, for example. Connect the OPTICAL IN
jack on an integrated amplifier to the DIGITAL OUT
OPTICAL jack on this unit.
• The audio of SACD and DSD or input from USB DAC is
not output from the DIGITAL OUT OPTICAL jack of this
unit.
• The digital signals that can be output by this unit are
linear PCM signals with a sampling frequency and
quantization bit rate of 192 kHz/24 bit (operation may not
be possible with all connected devices or environments).
> Install > Playback
Connecting with a digital coaxial cable
The signal is converted to analog in the D/A converter of the
integrated amplifier, for example. Connect the COAXIAL IN
jack on an integrated amplifier to the DIGITAL OUT
COAXIAL jack on this unit.
• The audio of SACD and DSD or input from USB DAC is
not output from the DIGITAL OUT COAXIAL jack of this
unit.
• The digital signals that can be output by this unit are
linear PCM signals with a sampling frequency and
quantization bit rate of 192 kHz/24 bit (operation may not
be possible with all connected devices or environments).
Advanced Setup | Others
En 9