Telstar TLP060310MD Manual De Instrucciones página 25

Filling The Rinse Aid Reservoir
Remove the rinse aid
reservoir cap by rotating it
counterclockwise.
NOTE:
Clean up any spilled rinse aid with an absorbent cloth to avoid excessive foaming during the next
wash.
Adjusting the rinse aid reservoir
Turn the rinse aid indicator dial to a number between 1 and 6.
The higher the number, the more rinse aid the dishwasher uses.
If the dishes are not drying properly or are spotted, adjust the dial to the next higher number
until your dishes are spot-free.
Reduce it if there are sticky whitish stains on your dishes or a bluish film on glassware or knife
blades.
Filling The Detergent Dispenser
Press the release catch on
the detergent 2 dispenser
to open the cover.
Carefully pour in the rinse-
aid into its dispenser, whilst
avoiding it to overflow.
Add detergent into the larger cavity
(A) for the main wash cycle .
For more heavily soiled wash loads, also add some detergent into
thesmaller cavity (B) for the pre-wash cycle .
25
DISHWASHER
TLP060310MD
Close the rinse aid reservoir
cap by rotating it clockwise.