Technical Data; Ec Declaration Of Conformity; Safety Instructions - DeWalt D51321 Manual Del Usuario

E N G L I S H
NAILER D51321
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Type
Recommended operating
pressure
Max. operating pressure
Air consumption per shot
Actuating mode
Fasteners
type
length mm
shank diameter mm
angle
Weight
L (sound pressure) dB(A)
PA
K (sound pressure uncertainty) dB(A)
PA
L (sound power) dB(A)
WA
K (sound power uncertainty) dB(A)
WA
Vibration emission value a
h
a = m/s²
h
Uncertainty K = m/s²
1
This value is a tool-related characteristic value
and does not represent the infl uence to the hand-
arm-system when using the tool. The infl uence
to the hand-arm-system when using the tool will
for example depend on the gripping force, the
contact pressure force, the working direction, the
adjustment of energy supply, the workpiece and
the workpiece support.
20
EC-Declaration of Conformity
MACHINERY DIRECTIVE
D51321
D
under "technical data" are in compliance with:
D51321
2006/42/EC, EN 792-13.
2
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
bar 4.9–8.3
D
bar 8.3
l 1.2 (at 6.9 bar)
contact actuating
flat head
Horst Grossmann
19–45
Vice President Engineering and Product Development
3
D
15º
D-65510, Idstein, Germany
kg 2.2
31.12.2009
88
2.5

Safety Instructions

101
When using tools, always observe the safety
2.5
regulations applicable in your country to reduce
the risk of personal injury. Read the following safety
instructions before attempting to operate this product.
1
4.7
Keep these instructions in a safe place!
1.5
General
WALT declares that these products described
E
WALT.
E
WALT, Richard-Klinger-Straße 11,
E
WARNING: To reduce the risk of injury,
read the instruction manual.
1. Keep work area clean.
Cluttered areas and benches can cause
accidents.
2. Consider work area environment.
Do not expose tools to humidity. Keep work
area well lit. Do not use tools in the presence of
flammable liquids or gases.
3. Keep children away.
Do not let children or visitors come into contact
with the tool. Supervision is required for those
under 16 years of age.