5 Seconds: The shutter release will delay for 5 seconds.
10 Seconds: The shutter release will delay for 10 seconds.
3: Press the SHUTTER button to take a picture.
4: After Self‐timer begins, the self‐timer LED will flash. One second for a
flash, till countdown is over.
Using the Flash
The flash is not only for taking pictures when there is insufficient light, but also for when
the subject is in shade or with backlight conditions. Pressing the RIGHT/FLASH button
cycles your camera through the various flash modes. The flash will not activate during
continuous shooting or movie recording.
1: Set the digital camera to the Capture mode.
2: Press the RIGHT/FLASH button to change the flash mode.
Each time the flash button is pressed, the flash icon changes.
Auto: Automatically turn on/of
Flash on: Force on the flash
Flash off: Force off the flash
3: Press the SHUTTER button to take a picture.
28