Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Hyundai Elantra GT
KIT FEATURES
• ISO DDIN radio provision
• Painted high gloss black
KIT COMPONENTS
• A) Radio housing trim panel • B) Brackets
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304
Antenna Adapter: • Not required
METRA - The World's best kits
Installation instructions for part 95-7357HG
(without NAV)
95-7357HG
®
metraonline.com
®
2013-up
Table of Contents
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DDIN radio provision ...................................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 95-7357HG
Resumen de contenidos para Metra 95-7357HG
- Página 1 ® Installation instructions for part 95-7357HG Table of Contents Hyundai Elantra GT (without NAV) 2013-up 95-7357HG Dash Disassembly ..........2 Kit Assembly – ISO DDIN radio provision ........3 KIT FEATURES • ISO DDIN radio provision • Painted high gloss black TOOLS REQUIRED •...
- Página 2 95-7357HG Dash Disassembly 1. Unsnap and remove the vent panels from either side of the radio down to the shifter base. (Figure A) 2. Remove the (4) screws and remove the radio. (Figure B) Continue to kit assembly (Figure B)
- Página 3 (Figure B) 3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Test the (Figure A) (Figure B) unit for proper operation. 4. Reassemble the dash in reverse...
- Página 4 ® Installation instructions for part 95-7357HG IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
- Página 5 ® Instrucciones de instalación para la pieza 95-7357HG Indice Hyundai Elantra GT (sin NAV) 2013 y mas 95-7357HG Desmontaje del tablero Ensamble del kit – Provisión de radio ISO DDIN ........3 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DDIN •...
- Página 6 95-7357HG Desmontaje del tablero 1. Suelte a presión y quite los paneles de las rejillas de cada lado del radio hacia la base de la palanca de velocidades. (Figura A) 2. Quite los (4) tornillos y quite el radio. (Figura B) Continúe con el ensamble del kit...
- Página 7 (Figura B) 3. Localice el arnés de cableado de fábrica en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra (Figura A) (Figura B) y/o de AXXESS.
- Página 8 ® Instrucciones de instalación para la pieza 95-7357HG IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...