Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio housing trim panel • B) Brackets • C) (4) #8 x 3/8" truss head Phillips screws
A
Metra. The World's Best Kits.
®
Mitsubishi Outlander 2014-2019
Mitsubishi Outlander
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• DDIN radio provision
• Painted Charcoal high gloss
B
MetraOnline.com
2020-2021
(ES Trim)
C
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
95-7015CHG
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7005
Antenna Adapter: Not required
Visit MetraOnline.com for audio/video and
steering wheel control interface options.
TOOLS REQUIRED
• Panel removal tool
• Phillips screwdriver
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 2/8/23 INST95-7015CHG

Publicidad

loading

Resumen de contenidos para Metra 95-7015CHG

  • Página 1 With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 2/8/23 INST95-7015CHG...
  • Página 2 DASH DISASSEMBLY 1. Unsnap and remove dash panel. (Figure A) Unscrew (4) Phillips screws and remove the factory radio. (Figure B) Continue to Kit Assembly (Figure A) (Figure B) 386.257.1187 MetraOnline.com...
  • Página 3 KIT ASSEMBLY 1. Attach the brackets to the radio housing trim panel using the (4) #8 x 3/8" truss head Phillips screws provided. (Figure A) 2. Slide the radio into the bracket/radio housing assembly and secure to the assembly using the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation. (Figure A) (Figure B) 4. Reassemble the dash in reverse order of disassembly. REV. 2/8/23 INST95-7015CHG...
  • Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 2/8/23 INST95-7015CHG...
  • Página 5 Asegúrese de que todas las conexiones de instalación estén seguras antes de realizar un ciclo de encendido para probar este producto. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 2/8/23 INST95-7015CHG...
  • Página 6 DESMONTAJE DEL TABLERO 1. Suelte a presión y quite el panel del tablero. (Figura A) 2. Desatornille (4) tornillos Phillips y retire la radio de fábrica. (Figura B) Continúe Kit de Montaje (Figura A) (Figura B) 386.257.1187 MetraOnline.com...
  • Página 7 ENSAMBLE DEL KIT 1. Una los soportes al panel de la moldura de la carcasa del radio con los cuatro tornillos #8 x 3/8” suministrados. (Figura A) 2. Deslice el radio dentro del ensamble del soporte/la carcasa del radio y sujételo al ensamble con los tornillos suministrados con el radio. (Figura B) 3. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 4. Monte el conjunto del radio en el tablero (Figura A) (Figura B) y vuelva a armar el tablero al revés de como lo desarmó. REV. 2/8/23 INST95-7015CHG...
  • Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 2/8/23 INST95-7015CHG...