Ocultar thumbs Ver también para 95-7018:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Mitsubishi Outlander Sport 2015-up
KIT FEATURES
• ISO DDIN radio provision
• 95-7018B - matte black
95-7018CHG - charcoal gloss
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (4) #8 x 3/8" Phillips screws
B
A
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7005
Antenna Adapter: • Not required
METRA - The World's best kits
All manuals and user guides at all-guides.com
Installation instructions for part 95-7018
95-7018
C
metraonline.com
®
®
Dash Disassembly ................................................. 2
Kit Assembly .......................................................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
CAUTION!
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
Table of Contents
All accessories, switches, climate controls panels, and
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Metra 95-7018

  • Página 1 All manuals and user guides at all-guides.com ® Installation instructions for part 95-7018 Table of Contents Mitsubishi Outlander Sport 2015-up 95-7018 Dash Disassembly ..........2 Kit Assembly ............3 KIT FEATURES • ISO DDIN radio provision • 95-7018B - matte black...
  • Página 2: Dash Disassembly

    All manuals and user guides at all-guides.com 95-7018 Dash Disassembly 1. Unsnap and remove the radio trim panel. (Figure A) 2. Remove (4) screws and remove the factory radio. (Figure B) Continue to kit assembly (Figure A) (Figure B)
  • Página 3: Kit Assembly

    (Figure B) 3. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation.
  • Página 4: Important

    All manuals and user guides at all-guides.com ® Installation instructions for part 95-7018 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a...
  • Página 5: Características Del Kit

    All manuals and user guides at all-guides.com ® Instrucciones de instalación para la pieza 95-7018 Indice Mitsubishi Outlander Sport 2015 y mas 95-7018 Desmontaje del tablero ......... 2 Ensamble del kit ............ 3 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DDIN •...
  • Página 6: Desmontaje Del Tablero

    All manuals and user guides at all-guides.com 95-7018 Desmontaje del tablero 1. Suelte a presión y quite el panel de la moldura del radio (Figura A) 2. Quite los (4) tornillos y quite el radio de fábrica. (Figura B) Continúe ensamble del kit...
  • Página 7: Ensamble Del Kit

    3. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero y realice todas las conexiones necesarias al radio. Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio...
  • Página 8: Importante

    All manuals and user guides at all-guides.com ® Instrucciones de instalación para la pieza 95-7018 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la...

Tabla de contenido