Setup; Minimum System Requirements; Making Detailed Settings; Using Controlpad64 With Software - Subzero CONTROLPAD64 Manual Del Usuario

4. SETUP

4.1 MINIMUM SYSTEM REQUIREMENTS

Pentium 3 800 MHz or higher
(CPU requirement may be higher for laptops)
256MB RAM
Direct X 9.0b or higher
Windows XP(SP2)or higher

4.2 Making detailed settings

For additional customisation and settings, you will
need to use the CONTROLPAD64 Software Editor
(explained below).
5. USING CONTROLPAD64
WITH SOFTWARE
5.1 CREATING MIDI PRESETS WITH THE
CONTROLPAD64 SOFTWARE EDITOR
5.1.1 Overview: What is a CONTROLPAD64
Preset?
Thanks to the CONTROLPAD64 Software Editor,
it's possible to configure your CONTROLPAD64 to
work with almost any device or software capable of
responding to MIDI information.
To summarise, here are some examples of what you
can do with a CONTROLPAD64 preset:
• Assign pads to send MIDI Machine Control
commands (MMC).
• Use the pads to transmit MIDI notes.
• Switch between two values of any MIDI CC# by
playing a pad.
Windows
Macintosh G3*800/G4*733 MHz or higher
(CPU requirement may be higher for laptops)
OS X 10.3.9 with 256 MB RAM,
OS X 10.4.2 or greater with 512 MB RAM
*G3/G4 accelerator cards are not supported
• Assign a button to control any MIDI CC# and
define its operational range.
• Save the entire set of altered controls to one of
the CONTROLPAD64's 8 preset locations.
• Define another 7 sets of parameter assignments
and save each one to a different memory
location.
• Recall any of the 8 personalized presets easily
and immediately.
11
Mac OS