Glacier bay 873-0127H2 Guía De Uso Y Mantenimiento página 8

Installation (continued)
7
Installing the tub spout
□
Wrap thread sealant tape around the pipe
threads of the tub spout (N) outlet in a
clockwise direction, as shown.
□
Thread the spout (N) onto the threaded
connection in a clockwise direction until the
spout (N) becomes ush with the nished wall.
□
Use the strap wrench to tighten the spout (N).
N
8
Removing the plastic cap
□
Before installing the escutcheon (I), remove the
plastic cap from the valve body (H) by twisting
the cap in a clockwise direction.
8
H