Operation - Glacier bay 874-0101 Guía De Uso Y Mantenimiento

Installation (continued)
11
Installing the shower head
□
Attach the shower head (C) to the shower arm
(B). Carefully tighten the shower head (C) with
a clean strap wrench.

Operation

1
Removing the handle,
escutcheon, and inverter
□
Remove the index (H) from the handle (F),
and then unscrew the handle screws (G) and
remove the handle (F) from the valve body (D).
□
Unscrew the escutcheon screws (AA), and
remove the escutcheon (E) from the valve
body (D).
□
Unscrew the inverter (1) from the valve body
(D).
□
Unscrew the sleeve (2) from the valve body (D).
2
Adjusting the temperature
limiter
NOTE: A thermometer can be held in the running water to
aid in reaching the desired water temperature.
□
For an average temperature setting, adjust the
limiter to a 90° angle.
□
For hotter water, adjust the temperature limiter
to the maximum 135° angle.
□
For colder water, adjust the temperature limiter
to the minimum 45° angle.
□
When nished, reinstall the inverter, escutcheon,
and handle.
B
C
AA
F
H
G
10
D
E
1
90°
2