vitapur Pro Soft VWS296GR Manual De Uso página 5

Tools Required:
• Flat head screw driver
• Pliers
• Tape Measure
• Pipe Cutter
• Propane Torch
V a
alVe dapTer and
The ¾" valve adapters that connect the bypass assembly to valve are shown in the Fig A & Fig. B.
1.
The inlet & outlet adapters in Fig B are installed on the water softener valve at the manufacturing facility.
These valves allow you to connect the bypass assembly with the inlet and outlet ports in the downward
direction Fig. D.
Fig. A shows a longer inlet water adapter. This means that the shorter inlet adapter has to be removed and
replaced with the longer inlet adapter if you want the bypass assembly with the inlet and outlet ports facing
upwards. (Fig.C)
Fig. C. The longer inlet adapter is in the box containing the bypass assembly, power adapter and wrench for
neck spacer removal (if needed).
Fig. A
Outlet Adapter
Fig. C
Outlet Port
Additional Installation Materials Not Supplied:
• ¾" Copper adapter, or ½" to ¾" copper adapter
• ¾" Pex pipe adapter or ½" to ¾" pex pipe adapter
• Lead free solder & Flux
• Emery cloth or steel wool
• Teflon Tape
b a
ypass ssembly
Inlet Adapter Outlet Adapter
Inlet Port
3
Fig. B
Fig. D
Outlet Port
Inlet Adapter
Inlet Port