Technical Data; Eu Declaration Of Conformity - Atlas Copco ETP SB33-12-I06-W Manual De Instrucciones

ETP SB33-12-I06-W

Technical Data

Product data
Motor voltage
Motor power
Free speed 9.6 V
Torque range
Weight
Wireless LAN Information
Output frequency 2,4 GHz:
2,412-2,462 GHz, channel 1-11 (FCC/IC domain).
2,412-2,472 GHz, channel 1-13 (ETSI/EU, TELEC domain,
in ad-hoc mode not using channel 12 or 13)
Output frequency 5 GHz:
U-NII-3 149, 153, 157, 161, 165 (ETSI/EU)
U-NII-1 36, 40, 44, 48 (FCC/IC)
U-NII-2 52, 56, 60, 64 (FCC/IC)
U-NII-2e 100, 104, 108, 112, 116, 132, 136, 140 (FCC/IC)
U-NII-3 149, 153, 157, 161, 165 (FCC/IC)
Battery Compatibility
Accessory
Battery, 18V (2Ah)
Battery, 18V (2,5Ah)
Battery, 18V (4Ah)
Battery, 18V (5Ah)
Charger Compatibility
Accessory
Multi-Charger, 18/36V
Ambient Temperature
Operating temperature, charge
Operating temperature, discharge
Storage temperature
Charger Temperatures
Charger operating tempera-
ture
18 V
1080 W
750 r/min
4 - 12 Nm (3 - 9 ft lb)
0.95 kg (2.1 lb)
Article nr.
4211 5500 11
4211 5500 12
4211 5500 21
4211 5500 22
Article Number
4211 5424 85
+5 to +40 °C
(+41 to +104 °F)
0 to +40 °C
(+32 to +104 °F)
−20 to +40 °C
(−4 to +104 °F)
+5 to +40 °C
(+41 to +104 °F)
© Atlas Copco Industrial Technique AB - 9834 4071 00
Declarations
Liability
Many events in the operating environment may affect the
tightening process and shall require a validation of results. In
compliance with applicable standards and/or regulations, we
hereby require you to check the installed torque and rota-
tional direction after any event that can influence the tighten-
ing result. Examples of such events include but are not lim-
ited to:
• initial installation of the tooling system
• change of part batch, bolt, screw batch, tool, software,
configuration or environment
• change of air- or electrical connections
• change in line ergonomics, process, quality procedures
or practices
• changing of operator
• any other change that influences the result of the tighten-
ing process
The check should:
• Ensure that the joint conditions have not changed due to
events of influence.
• Be done after initial installation, maintenance or repair
of the equipment.
• Occur at least once per shift or at another suitable fre-
quency.

EU DECLARATION OF CONFORMITY

We, Atlas Copco Industrial Technique AB, S-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that the product (with name, type and serial number,
see front page) is in conformity with the following Direc-
tive(s):
2014/30/EU, 2006/42/EC, 2011/65/EU, 2014/53/EU
Harmonized standards applied:
EN 300 328 V2.1.1, EN 300 440 V2.1.1, EN 301 489-1
V2.1.1, EN 301 489-17 V3.1.1, EN 55014-1:2017, EN
55014-2:2015, EN 61000-6-2:2019, EN
61000-6-4:2007+A1:2011, EN 62311:2008, EN
62841-1:2015, EN 62841-2-2:2014 + AC:2015
Authorities can request relevant technical information from:
Product Compliance Manager, Atlas Copco Industrial Tech-
nique AB, S-105 23 Stockholm Sweden
Stockholm, 18 February 2021
Carl von Schantz, Managing Director
Signature of issuer
Noise and Vibration Declaration Statement
• Sound pressure level <70 dB(A) , uncertainty 3 dB(A),
in accordance with ISO15744.
Safety Information
3