Notice And Caution Statements; Product Warranty; Specifications For Gcs404/Gcs405 Series Devices - Brooks Instrument GCS404 Serie Manual De Instalación Y Funcionamiento

Section 1 Introduction
®
Brooks GCS404/GCS405 Series

1-4 Notice and Caution Statements

1-5 Product Warranty

1-6 Specifications for GCS404/GCS405 Series Devices

1-2
Warning, caution and notice statements are located throughout this manual
in the ANSI format. A WARNING statement indicates a potentially
hazardous situation which, if not avoided, COULD result in death or serious
injury. A CAUTION statement indicates a potentially hazardous situation
which, if not avoided, MAY result in minor or moderate injury. It may also be
used to alert against unsafe practices. A NOTICE statement describes
specific information that requires special attention.
Product warranty information can be found on the Back Cover of this Manual
and on the Brooks website at www.BrooksInstrument.com. This
information provides general warranty information, limitations, disclaimers,
and applicable warranty periods according to product group.
Do not operate this instrument in excess of the specifications listed
in this manual. Failure to heed this warning can result in serious
personal injury and/or damage to the equipment.
It is the user's responsibility to select and approve all materials of
construction. Careful attention to metallurgy, engineered
materials, and elastomeric materials is critical to safe operation.
See Table 1-1 for specifications for the GCS400 Series.
See Figures 1-2 and 1-3 for dimensions for the GCS400 Series.
Installation and Operation Manual
Part Number: 541B175AAG
!
WARNING
X-PR-GCS400-eng
February, 2012