Veridian Healthcare TENS Remoto 22-043 Manual De La Instrucción página 25

INSTRUCTIONS FOR USE
5. MODE SETTING— To change the mode, while the unit is on/
operating, press and release the 'M'; the mode will switch to the
next in the sequence of 4 pulse types. The green lights at the
top of the display will scroll with each setting from left to right,
indicating which mode is active.
6. When changing modes, the intensity will revert to level 0 (lowest
sensation).
The sensation should be strong but comfortable; press the + or –
7.
button at any time during the treatment to change the intensity
as desired.
Press and release the POWER button to pause and resume
8.
treatment ; press and hold the POWER button for 2 seconds to
turn the device off at any time.
9. Be sure the device is OFF (no sensation is felt) before removing
the device from your skin. Take care during removal to best
protect the adhesive and preserve the life of the electrode pad.
10. Place the plastic cover over the gel side of the pad to prevent
them from drying out.
11. To conserve the battery and prevent shocks, the device will
automatically power off when not in use.
ENGLISH • 25