Setup And Use; Setup And Installation - Biamp Vocia WR-1 Manual Del Usuario

WR-1 Setup and Installation

Setup and Use

The WR-1 is a networked wall remote for use in a Vocia® system. It is designed to control background
audio in a single user-configured music zone. The WR-1 utilizes Power over Ethernet (PoE) technology
and after being connected to a PoE capable switch can participate as a physical interface in a Vocia
system. The WR-1 allows the selection of background music input sources, paging inhibit and source
mute from a wall-mounted panel. A backlit liquid crystal display (LCD) facilitates navigation through the
WR-1's menu. The WR-1's esthetically pleasing design fits with most room decor.
Installation
Install the unit away from heat sources, such as vents and radiators, and in rooms with adequate
ventilation. Ensure that air can circulate freely behind, beside, and above the unit. Do not exceed the
maximum ambient operating temperature of 18°-108° F (-8° - 42°C). Be aware of conditions in an
enclosed rack that may cause the temperature to exceed ambient room conditions.