Metra 95-7628BHG Instrucciones De Instalación página 3

ISO DDIN radio provision
1. Attach the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Attach the climate control module
below the completed assembly using
the factory hardware. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio and climate
controls. Metra recommends using
the proper mating adapter from
Metra and/or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
4. Reassemble the dash in reverse
order of disassembly, using the
95-7628BHG radio housing
trim panel.
95-7628BHG
Kit Assembly
(Figure A) (Figure B)
3