Klimatronic CoolFixx 2.0 Eco R290 Manual De Instrucciones página 15

1 Top Cover
2 Control Panel
3 Rear Housing
4 Air outlet Lourcer
5 Front Housing
6 Caster
7 Filter (evaporater)
Exhaust hose installation
•
Place the unit on a flat surface near a power socket, but at least 50cm away to other objects (see pic.1)
•
Connect the exhaust hose adapters with one end each of the exhaust hose by turning. Then, fix the
exhaust hose at the back of the portable local air conditioner (see pic.2).
•
Temporary exhaust hose installation: Please lead the free end of the exhaust hose out of the window
(see pic.3).
•
Exhaust hose installation with window kit: Depending on your type of window, insert the window kit
horizontally or vertically into your window. Lead the exhaust hose through the hole at the window kit
(see pic.3).
•
Make sure that the outlet is not blocked to prevent damage to the unit.
•
The exhaust hose should not be bent.
Pic.1
Control panel
8 Continouse Drainage Hole
9 Air Vent
10 Wrapping Post
11 Filter (condesator)
12 Drainage Hole
Pic.2 Pic.3