Eldom rotto WG40 Manual De Instrucciones página 9

fot. 05
fot. 04
- slide the airscrew (C) on the pin, fig. 6
- secure the airscrew with the nut (D), twisting it counterclockwise, fig. 7
- fix the front protective mesh (E). Couple both meshes in the bottom part
due to a bolt, protect by clamps,
fig. 8 and 9
- put the unit on a stable and even surface
Select the fan rotation speed (press "1", „2" or "3") with the switch (J).
After press the "0" position, the appliance is turned off.
Undependably on selected speed, it is possible to select the circulation
option after pressing the button (H).
To switch the above function off, pull the button out (H).
CLEANING AND MAINTENANCE
- before cleaning unplug the hair-dryer and wait until it cools down com
pletely
- never immerse the hair-dryer in water
- casing and power cord can be cleaned with soft dry or slightly damp
cloth
- the air inlet and outlet should be cleaned with soft brush
9
EN
H L
M
I
fot. 06
fot. 07
J
N
fot. 08f
FOT. 2
ot. 09