mothercare carnaby Guia Del Usuario página 13

safety & care notes
safety & care notes
IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY
WARNING! TO PREVENT FALLS, THE MATTRESS BASE OF THE COT SHOULD BE ADJUSTED TO THE LOWEST POSITION
BEFORE THE CHILD CAN SIT UP .
This user guide must be followed in detail to ensure the safety features of the cotbed are not compromised.
WARNING! Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc,
in the vicinity of the cot/bed.
WARNING! Do not use the cot/bed if any part is broken, damaged torn or missing, approved replacement parts can
be obtained from Mothercare.
WARNING! Do not leave anything in the cot/bed, or place it close to another product which could provide a foothold
or present a danger of suffocation or strangulation. For example strings, blind/curtain cords etc.
WARNING! Do not use more than one mattress in the cot. Only use the recommended Mothercare cot mattress,
ensure the gap at the sides and the ends does not exceed 30mm.
WARNING! Children are likely to play, bounce, jump and climb on beds, therefore the child's bed should not be
placed too close to other furniture or windows, and should be placed either tight to any wall or have a gap of
300mm between the wall and the side of the bed.
WARNING! Do not place this child's bed near heat sources, windows and other furniture.
The width and length are specified because it is important that the gaps between the mattress and the sides and
the ends of the cot will not exceed 30mm. This is to minimise the risk of a child's limb becoming caught in the gap.
The thickness of the mattress has been specified to ensure that the depth of the cot is greater than 500mm with the
mattress base in the lower position to minimise the risk of a child climbing or falling out of the cot.
Cots which convert to beds are intended from birth up to approximately 5 years.
The size of the mattress to be used with the child's bed is 1400mm long by 700mm wide and up to 120mm in thickness.
The lowest position of the mattress base is the safest, and should be used as soon as the baby is old enough to sit up.
Ensure the cot is placed at a reasonable distance from curtains, heaters and power points.
Always keep medication, string, elastic, small toys or similar small items out of reach from any position of the cot.
The product confirms to BS EN 716, BS 8509
To prevent injury from falls, when the child is able to climb out of the cot, the cot shall no longer be used for that child.
Thickness of the mattress chosen must not reduce the internal depth (from mattress surface to top of the side) to less
than 500mm with the base in its lowest position or 200mm with the base in its highest position.
The leg of the cot has a mark indicating this height.
If you leave the child unattended in the cot, always make sure that the dropside is in the highest position.
All assembly fittings should be tightened properly, checked regularly and re-tightened as necessary.
Screws and bolts should not be loose because a child can squeeze parts of the body, or clothing (e.g. strings,
necklaces, ribbons for babies dummies etc.) could get caught. There would be a danger of strangulation.
The cot/bed must be used on a level and stable surface, away from electric sockets.
Never move the cot/bed with a child in it.
Once assembled do not dismantle.
If any part is damaged stop using until the correct replacement part has been obtained from Mothercare.
Excessive chewing may damage the wood and cause splintering.
Style number: D2493
care of your product
Your cot/bed can be cleaned by wiping with a damp cloth and drying with a soft clean cloth.
Do not use abrasives, bleach, alcohol or ammonia based household polishes.
Version 1.1 06/12/14
12
© Mothercare UK Ltd. 2014