Publicidad
Idiomas disponibles
Idiomas disponibles
outdoor use reduces the risk of an electric shock.
If the use of the setting tool in a damp environment
is unavoidable, use a residual current circuit break-
er. Use of a residual current circuit breaker reduces
the risk of an electric shock.
PERSONAL SAFETY
Be careful, pay attention to what you are
doing and work sensibly when using a
setting tool.
Do not use a setting tool when you are tired or
under the influence of drugs, alcohol or medication.
ONE moment of inattention when working with the
setting tool can result in serious injuries.
Wear personal protective equipment and
use protective goggles at all times. The
wearing of personal protective equipment
such as a dust mask, non-slip safety
shoes, a helmet or ear protectors, depending on
the type and application of the setting tool, reduces
the risk of injuries.
Avoid inadvertent starting of the setting tool.
Ensure that the setting tool is switched off before
connecting it to the power supply and/or attaching
the battery (F), picking it up or carrying it. Having
your finger on the trigger when carrying the setting
tool or when connecting the setting tool to the pow-
er supply switched on can lead to accidents.
Remove the setting tools or wrenches before
switching on the setting tool. A tool or wrench
connected to a rotating part of the electric tool can
result in injuries.
Avoid abnormal body postures.
Ensure a secure footing and maintain your balance
at all times. This will enable you to control the
setting tool better in unexpected situations.
Wear suitable clothing. Do not wear loose clothing
or jewellery. Keep hair, clothing and gloves away
from moving parts. Loose clothing, jewellery or
long hair can become entangled in moving parts.
If collecting bins are fitted, ensure that
they are properly connected and used
correctly. By-passing of the cover cap is
prohibited.
14 | English
DIMENSIONS AND DESCRIPTION
OF THE TOOLS
A
Nosepiece
B
Front sleeve
C Hole for hanger bracket
D Red/yellow/green LED
E
Mandrel container
F
Battery with state-of-charge indicator
G Battery lock/release (latch)
H Setting point light (white LED (H))
I
Trigger
eBZ
ONE
ZERO
d
21 mm
23 mm
l1*
64 mm
66 mm
l2**
240/185
281/226
mm
h
275 mm
275 mm
b
68 mm
76 mm
*Rivdom eBZ 3: Front sleeve (B) may differ from
the standard, depending on the configuration
Rivdom eBZ 2/eBZ D: May differ from the standard,
depending on the option kit
**with/without mandrel container
eBZ 2
eBZ D
eBZ 3
23 mm
79 mm
310/255
mm
mm
283 mm
76 mm
Publicidad
