Blumfeldt Fez Manual Del Usuario página 11

SCOPE OF DELIVERY
Note: Double check contents before discarding the packaging to prevent
losing parts that are needed for assembly.
INSTALLATION
1. Attach the pump to the solar panel before use, plug the sprinkler head
or hose into the outlet of the pump, make sure the water level covers the
pump, but is lower than the sprinkler head.
2. Plug the power line of the pump into the plug of the solar panel, and then
fasten.
3. Position the solar panel in full sun to optimally run the pump, the backup
battery will be charged from the solar panel during normal operation and
automatically run the pump without sunshine.
4. If required the pump can be run by the battery in times of low sunlight.
Turn on the switch at located at the back of the solar panel, if the battery is
fully charged the pump will start to work immediately.
EN
11