English
5. At the beginning of the pipe place the connector
to the machine.
5.2.2. SUCTION PIPE CONNECTIONS
1. Separate the piece (11) from the tap so as to insert
the quick water plug.
2. Connect the water fi lter to the water supply.
Make sure before fastening the quick coupling that
the fi lter (8) is set. This fi lter is essential to prevent
impurities which could break the machine.
3. Connect the suction line to the fi lter
4. Connect the suction pipe to the machine in the
lower connection.
5.2.3 ELECTRICAL CONNECTION
1. Check that the switch is open (the symbol "I" must
be raised)
2. Connect the transformer to the machine
26/68