Bosch GSA 18 V-LI Professional Manual Original página 19

All manuals and user guides at all-guides.com
OBJ_BUCH-760-002.book Page 19 Friday, July 4, 2008 11:32 AM
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Saw blade*
2 Adjustable footplate
3 Saw blade holder
4 Locking sleeve for saw blade
5 Stroke rod
6 Stroke speed selector switch
7 On/Off switch
8 Battery unlocking button
9 Battery*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Sabre saw
Article number
Rated voltage V=
Stroke rate at no load n
0
– 1st gear spm
– 2nd gear spm
Tool holder
Stroke rate control
Stroke mm
Cutting capacity, max.
– in wood mm
– in non-alloy steel mm
– Pipe diameter mm
Weight according to
EPTA-Procedure
01/2003 kg
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Bosch Power Tools
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 77 dB(A);
Sound power level 88 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting wood: Vibration emission value
2
a =20 m/s , Uncertainty K=2.5 m/s
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
GSA 18 V-LI
if the tool is used for different applications, with
Professional
different accessories or poorly maintained, the
3 601 F4J 0..
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
18
working period.
An estimation of the level of exposure to vibra-
0 – 2400
tion should also take into account the times
0 – 2700
when the tool is switched off or when it is run-
SDS
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
28
Identify additional safety measures to protect
the operator from the effects of vibration such
250
as: maintain the tool and the accessories, keep
20
the hands warm, organisation of work patterns.
130
Declaration of Conformity
We declare under our sole responsibility that
3.4
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
English | 19
2
.
2 609 932 638 | (4.7.08)