Hama Quick Charge Instrucciones De Uso página 3

Note
• When using this product, observe the applicable local traffic laws and regulations.
• Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are
not blocked or restricted.
4. Startup and Operation
Note – Connecting terminal devices
• Before connecting a terminal device, check whether the power output of the charger can supply
sufficient power for the device.
• In principle, all terminal devices whose power consumption does not exceed 3000 mA can be charged.
Terminal devices that support Quick Charge 3.0 charge considerably faster.
• Please refer to the instructions in the operating manual of your terminal device.
• Plug the charger into a car socket in the vehicle electrical system.
• Directly connect the terminal device to be charged to the USB port using the included Micro-USB cable or
a suitable USB cable.
• Disconnect all cable and mains connections after use.
Note
• For some vehicle types, the ignition has to be switched on to supply power to the car socket. For more
information, please refer to your vehicle's manual.
5. Maintenance and Care
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Ensure
that no water intrudes the product.
6. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the product or from failure to observe the operating instructions and/
or safety notes.
3