CHICCO NEXT2ME AIR C
IMPORTANT - READ
CAREFULLY
KEEP FOR FUTURE
REFERENCE.
WARNING: TO AVOID DANGER OF SUF-
FOCATION REMOVE THIS PLASTIC COVER
BEFORE USING THE PRODUCT. THIS COVER
SHOULD BE DESTROYED OR KEPT AWAY
FROM BABIES AND CHILDREN.
• WARNING: Do not use this product with-
out reading the instructions for use first.
• WARNING: When in its highest position
the product is intended for use by children
of 0 to 5/6 months (weighing up to 9 kg).
• WARNING: Stop using the product as
soon as the child can sit or kneel or pull
itself up.
• WARNING: Placing additional items in the
product may cause suffocation.
• WARNING: Do not use the product if any
part is broken, torn or missing.
• WARNING: DO NOT USE the product in
"Crib Configuration" and/or "Bedside sleeper
Configuration" if any part is missing, dam-
aged or broken. Contact Artsana SpA for
spare parts and user instructions if needed.
DO NOT REPLACE missing, damaged or bro-
ken parts with non-OEM components or
components not approved by Artsana SpA.
• WARNING: Consult the user manual for
the list of components. Examine the prod-
uct regularly to make sure that there are no
loose, damaged or missing parts.
• WARNING: Always use all parts needed
for each configuration of use.
• WARNING: Be aware of the risk of burns
from cigarettes, naked flames and other
heat sources, like electric or gas heaters,
that are near the crib.
• Before assembly, check that the product
and all of its components have not been
RIB
damaged during transportation. Should
any part be damaged, keep out of reach of
children and do not use.
• Make sure that the adult using the product
AND
knows exactly how it works.
• WARNING: The product is ready for use
only when all locking mechanisms are
engaged. Make sure they are securely en-
gaged before use.
• WARNING: When your child is unattended
and the product is in "Crib Configuration", al-
ways make sure that the side is raised and
locked in the closed position and aligned
with the upper perimeter of the crib.
• When the product is being used, and above
all in "Crib Configuration", the wheels must
always be locked.
• All operations for opening, adjusting, fas-
tening and installing the product must be
carried out by an adult.
• Before using in the "Bedside sleeper
Configuration" (fastened to bed), make
sure the product is fastened and installed
correctly. Check the fastening system hold
before each use by attempting to push the
crib away from the parents' bed.
• The fixing straps are included in the pack-
aging. Other fastening systems should not
be used.
• To prevent danger of choking due to the
child's head being trapped, when the crib
is in the "Bedside sleeper Configuration"
(fastened to the bed) it should be prop-
erly fastened to the parents' bed with the
fixing straps as explained in the instruc-
tion booklet.
• WARNING: Before placing the child inside
the crib when the product is in the "Bed-
side sleeper Configuration" (fastened to the
bed), be sure that the fixing straps are fas-
tened and tightened correctly. The prod-
uct must be attached to the parents' bed
frame/support and there should be no
gaps between the lowest part of the Bed-
side sleeper crib and the parents' mattress.
• If there are gaps between the lowest part
20