Swingline Non-Stop Jam Free LS32-30 Manual De Instrucciones página 5

https://www.supplychimp.com/
Shredder Control Panel
Auto
Safety First - Read instructions before use.
This means you should be careful because long hair can become
entangled in the cutting head. This could hurt you.
This means don't reach into the feed opening of the cutting head.
This could hurt you.
This means be careful of ties and other loose clothing which could
become entangled in the cutting head. This could hurt you.
This means keep children away from shredder.
This means be careful of loose jewelry which could become
entangled in the cutting head.
This means do not shred CD's.
This means do not shred credit cards.
This means oil level.
This means oiling in operation.
Door Open Protection
If the door is opened during shredding, as a precaution the
shredder will instantly stop, and the door open symbol on the
indicator panel will flash red. To turn back to auto mode simply
press the auto button again (F).
Non-Stop Jam Free Anti-Jam Technology
Swingline Shredders will only shred stacks of paper that are
within the shredders sheet capacity. For example, a shredder
with a capacity of 22 sheets will not allow the shredding of
more sheets than this.
Sensors in the paper feed area measure the thickness of
paper about to be shredded. The ability to shred or not is
communicated through red and green lighting. Green means
that the stack of paper is within the shredders sheet capacity
and OK to shred. Red means that you have too much paper,
remove some sheets in order to shred.
Given that you are unable to shred more sheets of paper
than the shredder is capable of shredding, paper jams
are prevented.
This prevents time wasted through reversing paper and
unblocking jams not to mention the mess it can create.
Forward Reverse
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, use the reverse
function to unblock the shredder.
Alternating between the reverse and forward functions will help
unblock the feed area.
Initial Setup of SelfOil™
The shredder is designed to automatically lubricate the cutting
mechanism as required to ensure the product continues to
work to its maximum performance and to extend the product
life. Before turning on the machine for the first time, please
open the oil reservoir cap on the head of the shredder (J)
and pour in the 60ml bottle of oil provided as standard. This is
sufficient to allow the shredder to start for the first time and to
operate continuously for approximately one hour of shredding
before the reservoir will need refilling. Press and hold down the
Auto button (F) for 5 seconds to start the pump and prime the
system. This operation is only required the very first time the
shredder is used. When the 'Oil Refill' indicator is illuminated
, flip up the oil reservoir cap (J) and refill the oil reservoir
using a bottle of standard Swingline oil (1760049). The
automatic oiling operation
and you will hear the distribution pump during this time. Auto-
oiling operates after 15 minutes of shredding.
CAUTION
We only recommend the use of Swingline shredder lubricant to
maintain optimum performance and safety. ACCO accepts no liability
for product performance or safety if anything other than Swingline
branded shredder lubricant is used (Order Code 1760049).
WARNING
Do not use flammable oil.
Only Swingline part number 1760049 is
recommended.
lasts approximately 2 seconds
5