GE 24927 Manual De Instrucciones página 7

Programming Your Remote
4. Use the number buttons on the remote
5. Point the remote at the device. Test
6. Repeat Steps 1 – 5 for each device you
Programming Notes
• Some codes may operate only a few functions of your
device. There may be another code in the Code List
that controls more functions. Test other codes in the
Code List for more functionality.
• If you do not find a remote code that works your
device or there are no codes in the Code List for your
device, use the Auto Code Search method in the next
section to program your remote.
• For combination devices such as a TV/DVD combo
or TV/ VCR combo, you may have to enter a code for
each device.
• Write down the remote codes used to program the
remote for future reference.
to enter the first 4-digit remote code
you circled in the Code List in Step 1.
The red light will turn off after entering
the fourth digit.
the buttons on the remote to see if the
device responds as you would expect.
If the buttons do not operate the device,
return to Step 2 above and use the next
code that you circled for that device.
wish to control.
7