Code Identification; Reset To Factory Settings - GE 24927 Manual De Instrucciones

Control remoto universal
Ocultar thumbs Ver también para 24927:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using Your Remote

Code Identification

1. Press and hold down the SETUP
2. Press and release the desired device
3. Press and release the ENTER button.
4. Press and release the #1 button.
5. Press and release the ENTER button

Reset to Factory Settings

1. Press and hold down the SETUP
2. Press and release the MUTE button.
3. Press and release the number #0
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
button (TV, cbl, dvr, dvd, sat, audio,
aux1, aux2) you would like the
code for.
Count the number of times the
remote light flashes. This is the
number corresponding to the first
digit of the code. Repeat the process
by pressing the #2, #3 and #4
buttons for the remaining digits.
to exit this mode.
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
button. The red indicator light will
flash twice.
13

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

34929

Tabla de contenido