hafele R2 Dialock Instrucciones De Montaje Y De Servicio página 29

5. Hold the red deletion key in front of the reader unit while the red LED is
flashing.
The red LED lights continously after successful assignment.
If an error occurs during assignment:
 Disconnect the power supply and then reconnect it. Perform total reset,
if required (see page 32).
 Re-assign programming and deletion keys.
If the error persists:
 contact your service agent.
If the Dialock wall terminal is taken off the mains power supply for
more than 7 days, a new configuration of the wall terminal must be
carried out.
Mounting and Operating Instructions
Wall terminal R2 Dialock - status: 12.2016 - 732.29.132
29