Instructions For Use - hafele R2 Dialock Instrucciones De Montaje Y De Servicio

Instructions for use

Assignment of access rights to user keys
1. Hold the green programming key in front of the reader.
2. The green LED flashes.
3. Hold the user key being assigned in front of the reader within 5 sec-
onds. The green LED lights up to indicate that the access right for the
user key has been assigned.
4. Remove the user key.
5. Hold the next user key in front of the reader within 5 seconds. If no fur-
ther user keys are presented, the unit switches off automatically.
Withdrawing access rights of a single user key
1. Hold the red deletion key in front of the reader.
The red LED flashes.
2. Hold the user key to be cancelled in front of the reader.
3. Hold the user key to be cancelled in front of the reader.
The red LED flashes once, the key has been cancelled.
Withdrawing access rights of all user keys
When one user key is lost and should have no further access right, all
the user keys must be cancelled. Subsequently, all user keys must be re-
assigned.
1. Hold the red deletion key in front of the reader.
The red LED flashes.
2 Hold the green programming key in front of the reader.
The red LED flashes once.
All locking rights are cancelled.
3. Re-assign the user keys needed.
Wall terminal R2 Dialock - status: 12.2016 - 732.29.132
30
Mounting and Operating Instructions