Descargar Imprimir esta página

Fontanot gexi st 050 inox Manual Del Usuario página 98

Publicidad

EN)
product details
trade name: GEXI ST 050 INOX
type: spiral round staircase
materials used
STRUCTURE
description
composed of metal spacers (1)
and of plastic spacers (2) stacked and packed on the
central modular pole (3)
materials
spacers: Fe 370
plastic spacers: nylon
pole: Fe 370 galvanized
spacers: oven varnishing with epoxy powders
TREADS
description
circular metal treads (4) stacked on the central pole (3)
equipped by an antiskid and antiwear panel (5)
materials
treads: plate Fe 370 thickness 25/10
antiskid panel: polyropylene
treads: oven varnishing with epoxy powders
RAILING
description
composed of metal vertical balusters (6)
(4), of stainless steel bars (9) and of a PVC handrail (7)
materials
balusters: Fe 370
bars: stainless steel
handrail: PVC with aluminium core
(8): nylon
balusters: oven varnishing with epoxy powders
OBLIGATORY CLEANING AND MAINTENANCE
Clean the treads as soon as dirt spots and dust
deposits appear and at least every 6 months using
abrasive and non-aggressive detergents. NEVER use
abrasive scourers. After cleaning, thoroughly dry the
that form because of the limestone in the water.
Approximately 12 months from the date of installation,
check tightness of the screws of the various
components. Should even the smallest malfunction
occur, it is obligatory to immediately and professionally
carry out extraordinary maintenance.
USE PRECAUTION
Avoid any improper use that is not in accordance
with the product. Possible violations or installations
which don't comply with the providers instructions can
invalidate the agreed product conformities.
ES)
denominación comercial: GEXI ST 050 INOX
tipo: escalera de caracol de planta redonda
materiales empleados
ESTRUCTURA
compuesta por distanciadores (1) de metal (soldados
comprimidos en la columna (3) central modular.
materiales
distanciadores: Fe 370
espaciadores: nylon
columna central: Fe 370 galvanizado
acabado
distanciadores: barnizado en horno con polvos epoxídicos
peldaños (4)
(3) central y dotados de un panel (5) antideslizante y
antidesgaste
materiales
peldaños: chapa Fe 370, grosor 25/10
panel antideslizante: polipropileno
acabado
peldaños: barnizado en horno con polvos epoxídicos
BARANDILLA
compuesta por barrotes (6)
a los peldaños (4), por barras de acero inoxidable (9) y
por un pasamanos (7) de PVC
materiales
barrotes: Fe 370
barras: acero inoxidable
pasamanos: PVC con alma de aluminio
(8): nylon
acabado
barrotes: barnizado en horno con polvos epoxídicos
LIMPIEZA Y MANTENIMIENTO OBLIGATORIO
Realizar la limpieza de la escalera en cuanto aparezcan
manchas de suciedad y depósitos de polvo, y
periódicamente al menos cada 6 meses, con un paño
no abrasivos ni agresivos. NO utilizar nunca lanas
abrasivas o de hierro. Limpiar y secar bien después del
aureolas de cal dejadas por el agua. Transcurridos unos
12 meses desde la fecha de instalación, comprobar
apretados. Ante el menor defecto de funcionamiento,
es obligatorio realizar un mantenimiento extraordinario
según las reglas del arte.
PRECAUCIONES DE USO
Evitar usos impropios y no conformes con el producto.
Eventuales manipulaciones o instalaciones que no
cumplan con las instrucciones del fabricante pueden
de conformidad a las que previamente fue sometido el
producto.
-
-
98
(2)
PELDAÑOS

Publicidad

loading