ASROCK Fatal1ty X99X Killer/3.1 Serie Manual De Instrucciones página 26

Serial ATA3 Connectors
(SSATA3_0_1:
see p.1, No. 13)
(SSATA3_2_3:
see p.1, No. 14)
(SATA3_0_3:
see p.1, No. 15)
(SATA3_1_4:
see p.1, No. 16)
(SATA3_2_5:
see p.1, No. 17)
Serial ATA Express
Connector
(SATAE_1:
see p.1, No. 18)
USB 2.0 Headers
(9-pin USB3_4)
(see p.1, No. 27)
(9-pin USB5_6)
(see p.1, No. 28)
(USB7)
(see p.1, No. 8)
22
hese ten SATA3
connectors support SATA
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. If the eSATA port
on the rear I/O has been
connected, the internal
SSATA3_3 will not
function. If the Ultra M.2
Socket has been occupied,
the internal SSATA3_2
will not function.
* RAID is supported on
SATA3_0 ~ SATA3_5
ports only.
Please connect either
SATA or PCIe storage
devices to this connector.
he SATA Express
connector is shared with
the SATA3_4 and the
SATA3_5.
*he SATA Express
interface is a combination
of SATAE_1, SATA3_5,
and SATA3_4.
Besides two USB 2.0 ports
USB_PWR
P-
on the I/O panel, there
P+
GND
DUMMY
are two headers and one
port on this motherboard.
1
GND
Each USB 2.0 header can
P+
P-
USB_PWR
support two ports.