Using The Jet Mode Function - LG VR122HW NJM0 El Manual Del Propietario

Auto Operation (Artificial
Intelligence)
Cooling Only Model
This mode automatically sets the fan speed
and temperature depending on the room
temperature.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Auto Operation.
is displayed on the display screen.
•
3
Press or button to select the desired
operation code if the temperature is higher
or lower than the desired temperature.
Code
2 Cool
1 Cool slightly
0 Maintain room temperature
-1 Heat slightly
-2 Heat
NOTE
• In this mode, you cannot adjust the fan speed,
but you can set the air deflector to rotate
automatically.
Description

Using the Jet Mode Function

Changing Room Temperature
Quickly
This function allows you to cool indoor air quickly
during the summer or warm it quickly during
winter.
• Cooling & Heating model : The Jet Mode
function is available with Cooling, Heating and
Dehumidification Mode.
• Cooling Only model : The Jet Mode function
is available with Cooling, Dehumidification,
Fan, Auto Operation Mode and Air Purification
function.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
desired mode.
3
Press JET MODE button.
• is displayed on the display screen.
NOTE
• Jet Heating Mode is not available on some
models.
• In Jet Cooling Mode, strong air blows out at
temperature of 18 °C for 30 minutes.
• After 30 minutes later, setting temperature is
maintaining 18 °C
If you want to change the temperature,
Press or button to set the desired
temperature.
• In Jet Heating Mode, strong air blows out at
temperature of 30 °C for 30 minutes.
• After 30 minutes later, setting temperature is
maintaining 30 °C
If you want to change the temperature,
Press or button to set the desired
temperature.
• This function may operate differently from the
remote control display.
EN
19