Using The Jet Mode Function - LG VM122H6 NJM0 Manual Del Proprietário

Auto Operation(Artificial Intelligence)
Cooling Only Model
This mode automatically sets the fan speed and
temperature depending on the room temperature.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the Auto
Operation.
is displayed on the display screen.
•
3
Press or button to select the desired
operation code if the temperature is higher or
lower than the desired temperature.
Code
2 Cool
1 Cool slightly
0 Maintain room temperature
-1 Heat slightly
-2 Heat
NOTE
• In this mode, you cannot adjust the fan speed, but
you can set the air deflector to rotate automatically.
Description

Using the Jet Mode Function

Changing Room Temperature
Quickly
This function allows you to cool indoor air quickly
during the summer or warm it quickly during winter.
• Cooling & Heating model : The Jet Mode
function is available with Cooling, Heating and
Dehumidification Mode.
• Cooling Only model : The Jet Mode function is
available with Cooling, Dehumidification, Fan, Auto
Operation Mode and Air Purification function.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
desired mode.
3
Press JET MODE button.
is displayed on the display screen.
•
NOTE
• Jet Heating Mode is not available on some models.
• In Jet Cooling Mode, strong air blows out at
temperature of 18 °C for 30 minutes.
• In Jet Heating Mode, strong air blows out at
temperature of 30 °C for 30 minutes.
• This function may operate differently from the
remote control display.
17