4. SAFETY WARNINGS
1.
PLEASE READ CAREFULLY - The infrared heater is designed for safe opera-
tion. However, installation, maintenance, and operation of the heater can be
dangerous. Observing the following procedures will reduce the risk of fire,
electric shock, personal injury, and keep installation time to a minimum.
Save these instructions for future use.
2.
No liability will be accepted for damage caused by failure to follow these
instructions or by any other misuse of this heater.
3.
This heater is not designed to be used by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have received supervision or instructions on the use
of the appliance by a person responsible for their safety. Children and vulne-
rable persons must be supervised to ensure that they do not play with the
appliance.
4.
Take out the unit from its packaging and make sure it is in good condition
before using it.
5.
Do not allow children to play with parts of the packaging (such as plastic
bags).
6.
Before connecting the heater, check that the voltage of the network to which
it is to be connected is correct.
7.
Before connecting the heater, check that the power cord is not damaged.
8.
If the power cord is damaged, it must be replaced by the manufacturer or
technical service.
9.
Before unplugging the heater, turn it off. When plugging in, make sure your
hands are dry to avoid electrical hazard.
10.
Always unplug the heater when it is not going to be used.
11.
Avoid letting the cord stick out or hang where it can be easily pulled by
children.
12.
Avoid wetting or immersing the power cord and plug to avoid electrical
hazard.
13.
Do not use the heater in the vicinity of bathrooms, swimming pools or humid
spaces in general. Never place the heater where it can fall into any container
or body of water.
04